CablePro Reflection Power Cable

The Reflection power cable will improve every aspect of system performance. Your components are fueled by the AC power coming out of your wall. A nice clean signal makes a big difference in the way your system performs.

Your power cord must be able to reject incoming radio frequency noise and electro-magnetically induced noise to provide clean power. What you may not realize is that most power cables radiate a great deal of noise themselves. The Reflection power cord rejects noise entry and won't emit noise into nearby cables.

Utilizing four 16 gauge, OFC conductors with a low-loss Teflon dielectric, the Reflection power cord uses a special material spiralled around the conductors to deflect and reject noise as well as minimize noise that would normally be emitted from the cable. Most power cords use a braided shield to minimize noise but this affects sonics in undesirable ways. You can have low noise and the best possible performance with a Reflection power cord.

The 20 amp connectors are for those of you with special outlets or inlets. The blade configuration of these connectors does not fit standard North American AC outlets.